Will a r7 250 work in a pci e 1.0 x16 slot

jack turnbull · Nov 22, 2014

okay so i was wondering if i could put a r7 250 in a x16 pci e 1.0 slot and if it would work would there be any fps droping with it being in a older pci slot

Helldog26 · Nov 22, 2014

I dont think it will fit but if it does it will only run at the PCIe 1.0 speed. It will bottleneck to run at that speed since it was desiged to run at PCIex3.0 speeds.

jack turnbull · Nov 22, 2014

well what gpu would run with here are my specs if it help cause i will upgrade it in the future

Intel i3 3240t @2.9ghz
4gb ram
1tb hd

it just needs to run borderlands the pre sequel ant low to med

Helldog26 · Nov 22, 2014

Try the Geforce GT610 it runs in a PCIe1.0 slot.

jack turnbull · Nov 22, 2014

would a radeon hd 7750 work ?

Helldog26 · Nov 22, 2014

jack turnbull :

Not with out bottlenecking. Thats a PCIe 3.0 card and your board only has a PCIe 1.0 slot. I dont even know if it would fit correctly.

jack turnbull · Nov 22, 2014

so are all PCIe 1.0 x16 slots differant sizes on differant motherboards ?

and iv'e been reading on the forums that people have a 7750 in a PCIe 1.0 x16 slot

Helldog26 · Nov 22, 2014

No a PCIe3.0 should work in that slot however, it will only be able to run at 250GB transfer speed on that one lane. The PCIe3.0 card you have will have to throttle way down since it is designed to run at PCIe3.0 speeds.

jack turnbull · Nov 22, 2014

so it could work but it would be very slow

Helldog26 · Nov 22, 2014

Correct. Some people have said that it will and some say that it bottlenecks so bad that it doesnt work. Thats why I say it wont because I dont want to tell people it will work no problem than all of sudden nothing works.

jack turnbull · Nov 22, 2014

well do you know the best amd card that would work with it its just untill i can upgrade my mother board

Helldog26 · Nov 22, 2014

The best would be the r9 285 but its 249.99 dollars. Try the Raedon 5450 HD its 65.00

jack turnbull · Nov 22, 2014

with the 5450 bottle neck my mobo or could a 6450 pci 2.1 work

Helldog26 · Nov 22, 2014

They will bottle neck either way unless you have a PCIe1.0 card

Search

Will a r7 250 work in a pci e 1.0 x16 slot

jack turnbull

Distinguished

Helldog26

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

jack turnbull

Distinguished

Helldog26

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page