Graphic card is working but no display

GokuSsj · Nov 22, 2014

CPU core 2 duo e7400
GPU galaxy gt 730 1gb gddr5
Mobo gigabyte g31m-es2l
PSU crosair 450w
Ram 2gb ddr2
When I start my computer with graphic card my monitor just gose like sleep and all things working CPU and GPU fan is working but just a blank screen not even boot menu but when I try to run my comp. With internal graphic (graphic card is removed) it work fine plz help me

alexoiu · Nov 23, 2014

Try testing the GPU in a friend's PC. See if working.

GokuSsj · Nov 23, 2014

yes GPU is working

alexoiu · Nov 23, 2014

What ports using for connecting the graphics card to monitor?

GokuSsj · Nov 23, 2014

my pci-e x16 and a normal vga cable
(15 pin vga cable)

alexoiu · Nov 23, 2014

Try clearing the CMOS (unplug the power cord and remove the CMOS battery for a minute). Make sure that the monitor is connected to the graphics card and not to the board.

GokuSsj · Nov 23, 2014

CMOS clean , bios updated BUT still same

GokuSsj · Nov 23, 2014

plz check is my mobo G31M-ES2L(rev 1.1)(http://www.gigabyte.in/products/product-page.aspx?pid=2889#ov) is fine for my GPU (http://www.galaxytech.com/__EN_GB__/Product2/ProductDetail?proID=577&isStop=0&isPack=False&isPow=False)

rolli59 · Nov 23, 2014

It should be compatible, are you connecting the monitor to the card not the motherboard outputs?

Rahim Mushfiq · Nov 23, 2014

Take out the GPU and plug the VGA to the motherboard - If it still does not work it means your RAM is the fault not the graphics card.
Make sure you clear the CMOS by removing it while doing it just to be sure.
What is the speed of your DDR2 RAM ? Motherboard only supports maximum of 1066 MHz.

junkeymonkey · Nov 23, 2014

I see a few card issues with the 775 boards and wonder if the bios needs a update for newer cards but don't get one cause of its age??

junkeymonkey · Nov 23, 2014

I seen where you posted on the other thread with this board and you asked for help I wonder if you guys got a older revision board like as shown here at gigabyte and he got a new board that's the latest rev 2.4 and its got better support over the older ones and now more things work on it due to that??

GA-G31M-ES2L (rev. 2.4) rev. 2.3rev. 2.xrev. 1.x

http://www.gigabyte.com/products/product-page.aspx?pid=3598#ov

GokuSsj · Nov 24, 2014

First (rolli) i place the card in mobo and attach the VGA cable to
Second (rahim) my PC work when I place the VGA cable in mobo internal graphics ( the graphic card is removed) if the card is attached to the mobo no display at all
3rd (junket) if I replace the mobo then my GPU should work right? Is replacing my mobo is the solution plz tell me

GokuSsj · Nov 24, 2014

First (rolli) i place the card in mobo and attach the VGA cable to it
Second (rahim) my PC work when I place the VGA cable in mobo internal graphics ( the graphic card is removed) if the card is attached to the mobo no display at all
3rd (junket) if I replace the mobo then my GPU should work right? Is replacing my mobo is the solution plz tell me

rolli59 · Nov 24, 2014

Can you try the card in a different computer? Either the card is faulty or it is not going to work in your board (since you already tried BIOS update).

GokuSsj · Nov 24, 2014

I tried this in my friend's comp. Card Working properly

junkeymonkey · Nov 24, 2014

well I can be 100% on that but if you got one of the older release boards it maybe it don't support newer cards or something on them prevents this in some way so they [giga] now comes out with a rev.2 then find something's up with it then they come oyt with a rev.3 and so on each rev support will not work on the others cause its all different across each revision..[ board set up in layout parts and bios ]

like the gigabyte 990fx ud3 rev 1-2-3 were not able to support newer release amd chips or found to be something then they came out with the 220w chips so again rev 1-2-3 could not support them so they had to release a rev 4 that gives full support for them chips [I hope you get what I'm saying here ]

so of the board you got we need to know what revision it is if its the latest then forget all I said cause you then got the latest one

junkeymonkey · Nov 24, 2014

one more thing is what os do you use on it ??

GokuSsj · Nov 24, 2014

My mobo revision version is 1.1 you could find on Google by ga g31m es2l rev 1.x

5year old
And my OS is windows 7 64 bit

GokuSsj · Nov 24, 2014

Damm old PC

junkeymonkey · Nov 24, 2014

like I say see your last bios update was 2009 for that rev.. and that card series was released in 2013 ????? like I said I don't know if that may be the deal but it mat be seeing vid cards are not as plug and play as they use to be due to uefi bios's even I see newer board higher end boards may not accept a card with out a bios flash if one is available for it to do so .. and this may come standard on the newest release of this board as in the rev 2.3 or 2.4 ???? this is what I think when the guy above said he got a new board and now it works for him????

GokuSsj · Nov 24, 2014

ok then i should also replace my mobo ?

rolli59 · Nov 24, 2014

Or replace card with GT640 which will most likely work.

GokuSsj · Nov 24, 2014

sorry to say but i cant sent my card back becouse it is out of warranty

junkeymonkey · Nov 24, 2014

it maybe in need of a card that better fits the time frame of your board ?????

Graphic card is working but no display

Reputable

Titan

Reputable

Titan

Reputable

Titan

Reputable

Reputable

Titan

Distinguished

Polypheme

Polypheme

Reputable

Reputable

Titan

Reputable

Polypheme

Polypheme

Reputable

Reputable

Polypheme

Reputable

Titan

Reputable

Polypheme

Share this page