New motherboard problem

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
A

Austin Bragg

Distinguished
Dec 25, 2013
21
0
18,510
Hi. I recently got an Asus p5q se plus and put it in my new case which is a Rosehill challenger. I mounted it in the case and connected everything to it. I've got a geforece gt610 along with a q6600. I'm using my hard drive from my old computer as well. My problem is when I turn it on the fans spin and the hard drive boots up and everything seems to be working fine except I get no display. I've tried taking out ram and even without ram I get no beeps. I've got my speaker hooked up correctly and have checked the trouble shooting guide which was very useful except it didn't fix my problem. Any help would be greatly appreciated. Thanks
 
Solution
Phillip Corcoran
First off you need to be 100% sure that the monitor actually works, especially if it is not showing "No Signal" on the screen (or is it?). Try it on another PC (or connect it to the on-board GPU) so you can put that "unknown" to bed.

You might want to try reseating the GPU card if the monitor proves to be okay.
Sort by date Sort by votes
Phillip Corcoran

Phillip Corcoran

Titan
Moderator
Sep 7, 2013
25,977
860
120,140
First off you need to be 100% sure that the monitor actually works, especially if it is not showing "No Signal" on the screen (or is it?). Try it on another PC (or connect it to the on-board GPU) so you can put that "unknown" to bed.

You might want to try reseating the GPU card if the monitor proves to be okay.
 
Upvote 0 Downvote
Solution
A

Austin Bragg

Distinguished
Dec 25, 2013
21
0
18,510
The monitor is working just fine. And I've taken the GPU out plenty of times and put it back in. This board has no on board graphics and I should at least be getting a beep when no ram is in it which I'm not
 
Upvote 0 Downvote
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom