PC Wiring help.

GeckoBL

Reputable
Nov 24, 2014
20
0
4,510
Hey Guys, I just ordered all the parts to my new PC. I think I'll be able to build it all pretty easily, I'm just worried about wiring the system. I feel like a might mess something up or break a part. I'd like to know if any of you know any guides or videos telling me how to wire everything. I would also like to know if any of you guys did it easily and I'm just nervous for nothing, thanks :??:
 
Solution
Hi,

It`s quite straight forward,you have the manual and you can view youtube to see how its done. It`s proberly best if you build it on the box that the mobo comes in,this will stop it shorting and make sure it runs before you put it in the case. The 1 thing you must remember is to ground yourself before you touch the parts,this can be done by touching the metal taps or draining board as they should be connected with an earth. After avoid moving around too much to minimise static build up,so if you go and make a drink or get up and answer the phone just touch somehting that is earthed again. you can always post back here if you have any ????
Good luck

beefy

Distinguished
May 22, 2004
236
0
18,760
Hi,

It`s quite straight forward,you have the manual and you can view youtube to see how its done. It`s proberly best if you build it on the box that the mobo comes in,this will stop it shorting and make sure it runs before you put it in the case. The 1 thing you must remember is to ground yourself before you touch the parts,this can be done by touching the metal taps or draining board as they should be connected with an earth. After avoid moving around too much to minimise static build up,so if you go and make a drink or get up and answer the phone just touch somehting that is earthed again. you can always post back here if you have any ????
Good luck
 
Solution