i have core i7 920 1st gen processor,asus rampage 2 extreme motherboard,ram 4gb ddr3 with 1333 bus speed,graphic card hd 787

Toggle sidebar Toggle sidebar
C

christopher789

Reputable
Nov 26, 2014
68
0
4,630
i have core i7 920 1st gen processor,asus rampage 2 extreme motherboard,ram 4gb ddr3 with 1333 bus speed,graphic card hd 7870 with powersupply corsair vx550 watt and 1tb hard drive last time i play watch dogs game on this pc with ultra settings it stuck on game and i tried to rebot it but faild bcz it hardly stuck then i remove power cable from it and replace power cable again and start it but my pc stuck at widows logo .once again i unplug power cable and shutdown for about 5 to 10 sec then i start it with power button then screen shows display with this message ERROR CHASSIS INTRUDED FATAL ERROR...SYSTEM HALTED THEN
 
Solution
Darkbreeze
Go into the BIOS and turn off the "Tamper warning" if there is a setting for it or under security remove the supervisor password by selecting the password field, clearing all characters and hitting "enter". You may have to do that for both fields. After that there should be no security features enabled. If it does not allow you to do this without entering a password first, and you do not know the password, you're SOL because we cannot help you circumvent security features in case the system ownership is questionable.
Sort by date Sort by votes
Darkbreeze

Darkbreeze

Retired Mod
Jun 24, 2014
80,411
7,631
176,790
Your board has BIOS flashback, meaning you can download the latest BIOS to a flash drive and update, repair it that way, by flashing it with the latest BIOS.

14r7d2.png



The latest BIOS file can be found below.

http://www.asus.com/ROG_ROG/RAMPAGE_II_EXTREME/HelpDesk_Download/
 
Upvote 0 Downvote
C

christopher789

Reputable
Nov 26, 2014
68
0
4,630
YES SIR I UPDATE LATEST BIOS VERSION BUT EVERY TIME SAME RESULT PC STUCK SOME TIME IN BIOS SOME TIME IN WINDOWS AND I RESTART PC AND NO DISPLAY WHEN I UNPLUG POWER CABLE FOR FEW SECOND THEN PC START EVERY TIME I FACE 2 PC STUCK AND CHASISS INTRUDED ERROR SYSTEM HELTED
 
Upvote 0 Downvote
Darkbreeze

Darkbreeze

Retired Mod
Jun 24, 2014
80,411
7,631
176,790
Go into the BIOS and turn off the "Tamper warning" if there is a setting for it or under security remove the supervisor password by selecting the password field, clearing all characters and hitting "enter". You may have to do that for both fields. After that there should be no security features enabled. If it does not allow you to do this without entering a password first, and you do not know the password, you're SOL because we cannot help you circumvent security features in case the system ownership is questionable.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom