Hey People,
Today i tried to install windows 10 (Technical Preview) on my laptop (Asus NV56VB).
the day before i installed it on my desktop without any problem's but now i encountered a weird problem. at the installation progress ( Copying system file's ) the installation was stuck i waited the whole night for progress but it remained 0% so i tried again i pressed my pc off and then i booted my usb again and after i pressed "Install Now" the blue/Purple screen showed up with Setup is loading/initializing/preparing and my install was stuck again waited for 4 hours.
then i tried to boot up my HDD again ( i dont know why because it was formatted before the install started ) so i pressed of my pc pulled my USB out and i turned it back on and suddenly it show's my Bios Setup. then i looked at the boot tab and i saw NO boot option's but under my Advanced page i saw 2 SATA Device's included my hard disk drive. so i looked up the whole internet for possible solution's but i found maybe 1 or 2 but they didnt work i even tried some Rescue disks and then i encountered something weird. If i would boot the Rescue disk with the HDD connected to the pc then the disks are Stuck at some loading point's as well even waited for more than an hour and when i try without HDD it loads good. from that moment i connected it to an other PC the other pc was able to boot from it but when i boot from it i only a flashing _ and further i feel that the HDD is being used in loops Vibration/Ticks in loops. so i tried booting some rescue disks again with the same result.
the point is i cant Read/Wite/Edit the disks because the Rescue Disks do fail to load with the HDD connected
And when the PC is stuck at those point's the HDD Keep busy ( The little light of the HDD is on the whole time )
i have an HGST HTB-TT5SAE500 its an HDD not SSD ( if i'm right )
im hoping for some working solution's
Greeting's Hurde
Today i tried to install windows 10 (Technical Preview) on my laptop (Asus NV56VB).
the day before i installed it on my desktop without any problem's but now i encountered a weird problem. at the installation progress ( Copying system file's ) the installation was stuck i waited the whole night for progress but it remained 0% so i tried again i pressed my pc off and then i booted my usb again and after i pressed "Install Now" the blue/Purple screen showed up with Setup is loading/initializing/preparing and my install was stuck again waited for 4 hours.
then i tried to boot up my HDD again ( i dont know why because it was formatted before the install started ) so i pressed of my pc pulled my USB out and i turned it back on and suddenly it show's my Bios Setup. then i looked at the boot tab and i saw NO boot option's but under my Advanced page i saw 2 SATA Device's included my hard disk drive. so i looked up the whole internet for possible solution's but i found maybe 1 or 2 but they didnt work i even tried some Rescue disks and then i encountered something weird. If i would boot the Rescue disk with the HDD connected to the pc then the disks are Stuck at some loading point's as well even waited for more than an hour and when i try without HDD it loads good. from that moment i connected it to an other PC the other pc was able to boot from it but when i boot from it i only a flashing _ and further i feel that the HDD is being used in loops Vibration/Ticks in loops. so i tried booting some rescue disks again with the same result.
the point is i cant Read/Wite/Edit the disks because the Rescue Disks do fail to load with the HDD connected
And when the PC is stuck at those point's the HDD Keep busy ( The little light of the HDD is on the whole time )
i have an HGST HTB-TT5SAE500 its an HDD not SSD ( if i'm right )
im hoping for some working solution's
Greeting's Hurde
Facebook
Twitter
Instagram