I have a fx 6300 paired with msi 990FXA-gd65, overclock to 4.7GHz @ 1.45v.
Currently passes 10 run of intel burn test using very high mode. Cpu temps and northbridge temps are 60 and 96 celcius. Ambient temp about 22 celcius.
My question is:
1. Is it stable? Or should i re-run using maximum stress test with 20x runs?
2. If yes then what if i turn off the air conditioner, let the room reaches 30 celcius then re run the torture test? Obviously the temp of the cpu and northbridge will went up past that. Should i keep this overclock or back down one step? (Before was 4.6 GHz @ 1.36v, cpu and nb temps are 51 and 82 respectively)
Currently passes 10 run of intel burn test using very high mode. Cpu temps and northbridge temps are 60 and 96 celcius. Ambient temp about 22 celcius.
My question is:
1. Is it stable? Or should i re-run using maximum stress test with 20x runs?
2. If yes then what if i turn off the air conditioner, let the room reaches 30 celcius then re run the torture test? Obviously the temp of the cpu and northbridge will went up past that. Should i keep this overclock or back down one step? (Before was 4.6 GHz @ 1.36v, cpu and nb temps are 51 and 82 respectively)