Howdy! I have a Linksys E4200 router and a while ago it upgraded its firmware to version 2.1.41.162351 (which also made it "Smart Wifi"). I do a lot of tech stuff and require some things to be port forwarded for whatever reason. As such, I have roughly 20 rules on single port forwarding and maybe around 6 on the range. Today I needed to port forward my Plex server to access it at a remote location. I logged into the web interface and typed in the rule. However, upon clicking apply, I am faced with the following message: "The rules cannot be created because multiple rules were specified for a single port/protocol combination." I think that it means there are multiple rules for the same port. I do see one example of that: my cPanel server port is both on the single port and range. I did try to remove them, but upon clicking apply, the same message occurs; causing an infinite loop of not being able to fix what I think is the cause of my problem . Yes, I did try to turn it off and turn it back on again. Linksys is closed on Sunday, to my knowledge, and I really want to get this done tonight. If you need more info, I am happy to give it! Also, a factory reset is not really preferred, because it would require all my settings to be put back, which is very time consuming and it is getting late.
Thanks in advance!
Thanks in advance!
Facebook
Twitter
Instagram