hello everyone i tried to overclock intel e5400 up to 3.4 ghz without touching voltages but after 3.4 ghz i am getting some problems like lagging, pc is not opening or after opening "hardwar error" issue.In bios there are three options in terms of voltage:
nb voltage
dram voltage
cpu vtt
All of them is "auto"
Should i change them or these problems are caused by another thing?
(specs:
e5400
msi g41 p33 combo 3g ddr2 ram 800mhz)
nb voltage
dram voltage
cpu vtt
All of them is "auto"
Should i change them or these problems are caused by another thing?
(specs:
e5400
msi g41 p33 combo 3g ddr2 ram 800mhz)