Computer wont turn on when the case Fan it's connected

Toggle sidebar Toggle sidebar
S

sebastiaang

Reputable
Dec 8, 2014
2
0
4,510
So i just build a new pc. And everthing runs smoth if I don't have the case fan connected to the psu , but when I connect it the computer wont even turn on and gives me a fault smell like burned plastic no beeps boot screen nothing. Just the smell what could it be maybe I connected wrong ?? Also if I did connect it wrong how do I connect it. The pin to psu is missing 2 instead of 1 like the other

It's my first 1 sorry that I'm a noob
 
Solution
G
Ok, good news are even reviewers have had problems with the fan controller in your case.
http://www.inwin-style.com/en/data/file/201402/1391589729UGVW4.pdf
This is the manual for your case (just two pages :p ) and it looks like you have to check the cables and their collours. According to one review one of the connectors came to him connected the wrong way, so you better check them out. By the way according to the instructions the connector that goes to the PSU must have all 4 pin (standard molex) and so must the connector that comes from the PSU. The connector to the fan only has 3 pin.
Sort by date Sort by votes
G

gh0st313

Reputable
Dec 3, 2014
30
0
4,560
The easiest option is to do what drkatz42 said, just go to a shop and by a standard 3pin or 4pin fan for your case and connect it to the motherboard (you can't connect it the wrong way so do't worry). But if you want post a picture of the connector and the name of the case and the PSU. In the end there are 3 possibilities:
1) You connected the fan either to the wrong connector, or the wrong way.
2) The connector to the PSU is faulty.
3) Your fan is problematic.
 
Upvote 0 Downvote
S

sebastiaang

Reputable
Dec 8, 2014
2
0
4,510
The case is a inwin gt1.

The psu it's a Raidmax RX630ss

How could I replace the connector to the psu can I get a link or something where I could buy another connector. Sorry for the lag I had no internet
 
Upvote 0 Downvote
G

gh0st313

Reputable
Dec 3, 2014
30
0
4,560
Ok, good news are even reviewers have had problems with the fan controller in your case.
http://www.inwin-style.com/en/data/file/201402/1391589729UGVW4.pdf
This is the manual for your case (just two pages :p ) and it looks like you have to check the cables and their collours. According to one review one of the connectors came to him connected the wrong way, so you better check them out. By the way according to the instructions the connector that goes to the PSU must have all 4 pin (standard molex) and so must the connector that comes from the PSU. The connector to the fan only has 3 pin.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom