Fx 6300 + gtx 970 4 gb or i5 4440 + gtx760
- Thread starter Gamerzz
- Start date
Solution
Coolboy951
Dignified
- May 30, 2014
- 3,435
- 0
- 13,960
the fx 6300 and 970 is a good combo but the cpu might slightly bottleneck if it does just overclock it 1-2ghz thats what i did with my fx 6120 and no i have no bottlenecking issues with my 7950 boost 3gb
Robertwhyte
Reputable
- May 6, 2014
- 583
- 0
- 5,160
good lord go with the 970! why would you even think about a 760 lol but the 6300 is pretty terrible, try get the 8350 or 8320.
Coolboy951
Dignified
- May 30, 2014
- 3,435
- 0
- 13,960
You can overclock it with control catlyst thats what i did but if not get a Fx 8320 its a great cpu that has 8 cores built in and is clocked at 4.0ghz
- Jan 1, 2013
- 24,574
- 650
- 91,240
^ yes it does mate - to get the most from a 6300 you need a semi- decent cooler & motherboard & run the chip at 4ghz minimum - this is very easily achievable.
A 6300 with a 970 will give better gaming performance that the i5 with a 760 (the 760 is fairly weak now for newer titles & is firmly mid range class at best now)
A 6300 with a 970 will give better gaming performance that the i5 with a 760 (the 760 is fairly weak now for newer titles & is firmly mid range class at best now)
maddogfargo
Splendid
- Nov 28, 2006
- 3,344
- 8
- 22,965
FGX 6300 will 'usually' do 4.4 GHz +/-100MHz on stock voltage.
FX 8320 or even the 8370e would be good options.
Cooler Master Hyper 212 EVO will be good for any of those CPUs for up to 4.5GHz or so.
I've been very happy with my FX 8350 + GTX 970. Runs everything I like to play like an i7.
FX 8320 or even the 8370e would be good options.
Cooler Master Hyper 212 EVO will be good for any of those CPUs for up to 4.5GHz or so.
I've been very happy with my FX 8350 + GTX 970. Runs everything I like to play like an i7.
- Jan 1, 2013
- 24,574
- 650
- 91,240
^ yes you can my friend 
that little Matx board has fairly decent MOSFETs & vrm heat sinking.
You can push to 4ghz easily mate ,trust me,built nearly a dozen systems using that same combo all run at 4ghz no problems on stock voltages.
You just need a semi-decent cooler ,used a cheapsh zalman cnps5x on the last 2 builds & its solid as a rock for a 4ghz overclock.
that little Matx board has fairly decent MOSFETs & vrm heat sinking.
You can push to 4ghz easily mate ,trust me,built nearly a dozen systems using that same combo all run at 4ghz no problems on stock voltages.
You just need a semi-decent cooler ,used a cheapsh zalman cnps5x on the last 2 builds & its solid as a rock for a 4ghz overclock.
maddogfargo
Splendid
- Nov 28, 2006
- 3,344
- 8
- 22,965
Consider the FX 6350 then. Higher stock and boost speeds while still low current draw.
Or just keep your FX 6300 OC in the 4.2-4.3GHz range and stick to stock voltages.
Robertwhyte
Reputable
- May 6, 2014
- 583
- 0
- 5,160
if you can see it turboing to 3.9GHz... disable turbo mode and change the core clock to 3.9GHz. problem solved. although i would try 4ghz and run a few stress test and play some cpu demanding games like crysis 3, and if you BSOD, change it back to 3.9, i had to do this on my old 8320 on an M5A97 LE R2.0 Mobo. Although use an aftermarket cooler.
- Jan 1, 2013
- 24,574
- 650
- 91,240
http://www.flipkart.com/deepcool-gammaxx-300-cooler/p/itmdh22yfu6nm6mc?pid=COLDH22W6ZUWBC5D
If it fits your case OK - its a big cooler & probably the best value on flipkart - it'll run a 6300 in excess of 4ghz very very easily.
& yes your board will run the 6300 overclocked with no problem at all.
If it fits your case OK - its a big cooler & probably the best value on flipkart - it'll run a 6300 in excess of 4ghz very very easily.
& yes your board will run the 6300 overclocked with no problem at all.
TRENDING THREADS
-
Question User RX 580 8gb red devil powercolor, asking original BIOS- Started by PizzaInGame
- Replies: 5
-
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 19
Facebook
Twitter
Instagram