Ok so I recently ordered a new cpu and heatsink from my old ones as I wanted better temps and a faster cpu. So I installed the new cpu and heatsink everything powered up whent to the bios and just saved and quit to Windows. Then I checked my temps and they where at 70c so I rechecked and the heatsink wasent seated properly I then reseated it and everything powered up again but nothing showed up on screen. I still get the 2 succesfull start up beeps. (Things I have tried) I have used a different hdmi cable. I have taken out the new cpu and put in the old one. I have unplugged the ram and cleared the csmos And I have taken out the gpu and used dvi with a separate monitor. This is my second thread looking for some genuineness at this point but any little think you think it could be please post thank you in advance! Nothing has worked I'm really frustrated please help.