Hello everybody. I have been stumped after 8+ hours of trying to install my new GPU that I purchased to upgrade my old HD Radeon 6770.
I have upgraded my desktop's PSU to 800w.
I have attached the auxiliary 6-pin connector with the two Molex cables from the PSU in order to power up the GPU.
I am also using a DVI cable to connect to my monitor.
Now, I have uninstalled the drivers from my old Radeon, updated my BIOS to 7.16, and shut off the computer. Removed the old GPU and replaced it with the new one, a GTX 750ti 2GB. I attached the necessary power cables and DVI cord.
However, whenever I turn on my computer it just gets stuck on what I am assuming is the POST screen which tells me to press ESC to blah blah blah.
Pressing ESC, DEL, all of the F-whatever buttons does not work and it appears to be frozen.
What does happen is there is a beep literally every 27seconds for 3 times. On the fourth set of 27 seconds, it does a quick 3 or 4 beeps and it turns off.
I'm a little puzzled. I just built my younger brother's rig with the same GPU (except it wasn't Windforce Edition, but Black Edition).
Here are my specs (hopefully I got it right)
MoBo: IPISB-CU (Carmel2)
RAM: 6GB DDR3-1333
CPU: Intel i3-2020 3.3GHz
PSU: 3R AK 800
New GPU I am trying to install: Gigabyte GeForce (Windforce) GTX 750ti 2GB GDDR5
PS: Also tested the GPU on another rig I have and it works fine, so it has to be with my current build.
If you guys need more information, let me know. Thank you again!
I have upgraded my desktop's PSU to 800w.
I have attached the auxiliary 6-pin connector with the two Molex cables from the PSU in order to power up the GPU.
I am also using a DVI cable to connect to my monitor.
Now, I have uninstalled the drivers from my old Radeon, updated my BIOS to 7.16, and shut off the computer. Removed the old GPU and replaced it with the new one, a GTX 750ti 2GB. I attached the necessary power cables and DVI cord.
However, whenever I turn on my computer it just gets stuck on what I am assuming is the POST screen which tells me to press ESC to blah blah blah.
Pressing ESC, DEL, all of the F-whatever buttons does not work and it appears to be frozen.
What does happen is there is a beep literally every 27seconds for 3 times. On the fourth set of 27 seconds, it does a quick 3 or 4 beeps and it turns off.
I'm a little puzzled. I just built my younger brother's rig with the same GPU (except it wasn't Windforce Edition, but Black Edition).
Here are my specs (hopefully I got it right)
MoBo: IPISB-CU (Carmel2)
RAM: 6GB DDR3-1333
CPU: Intel i3-2020 3.3GHz
PSU: 3R AK 800
New GPU I am trying to install: Gigabyte GeForce (Windforce) GTX 750ti 2GB GDDR5
PS: Also tested the GPU on another rig I have and it works fine, so it has to be with my current build.
If you guys need more information, let me know. Thank you again!