- Dec 15, 2014
- 22
- 0
- 4,520
Hello.
This is my drive setup.
2 x 1TB HDDs in RAID 0 - Called DATA drive
1 x 500GB SSD - Called SYSTEM
1 x 120GB SSD - 64GB used as Intel Rapid Storage Cache for DATA (RAID 0 drives). 30GB used as partition for "stuff" I'm working on.
Additionally 1TB backup drive, but that does not matter here.
PROBLEM
In short:
In long:
One drive is displayed 3 times. 1HDD is listed (It is not SSD).
I can't update firmware or do any "optimization".
I read that it is because of me using RAID 0 drives.
I'm not really asking how to fix it, as I already read that there is no way and I don't think Samsung is even interested in looking into it.
My question:
Is there any alternative for Samsung Magician? I would like to see disk health, total transfer and it would be nice to be able to "optimize" drive.
Than you in advance for your help.
This is my drive setup.
2 x 1TB HDDs in RAID 0 - Called DATA drive
1 x 500GB SSD - Called SYSTEM
1 x 120GB SSD - 64GB used as Intel Rapid Storage Cache for DATA (RAID 0 drives). 30GB used as partition for "stuff" I'm working on.
Additionally 1TB backup drive, but that does not matter here.
PROBLEM
In short:
In long:
One drive is displayed 3 times. 1HDD is listed (It is not SSD).
I can't update firmware or do any "optimization".
I read that it is because of me using RAID 0 drives.
I'm not really asking how to fix it, as I already read that there is no way and I don't think Samsung is even interested in looking into it.
My question:
Is there any alternative for Samsung Magician? I would like to see disk health, total transfer and it would be nice to be able to "optimize" drive.
Than you in advance for your help.
Facebook
Twitter
Instagram