How to resolve cyclic redundancy check in external hard disk

Curtis CJ Lewis

Reputable
Dec 21, 2014
8
0
4,510
I am unable to initialize my new external hard disk drive WD 500GB, each time i get the message DATA ERROR: CYCLIC REDUNDANCY CHECK.....PLEASE HELP ME...THE DISK APPEARS IN DISK MANAGEMENT BUT NOT IN MY COMPUTER...CANNOT ACCESS IT AT ALL PLEASE HELP ME!
 
Solution
That's exactly what I was going to suggest. While a DOA drive isn't uncommon, it's much MORE common for it to be a problem with the enclosure itself. I also recommend trying to initialize it connected directly to the motherboard.

Curtis CJ Lewis

Reputable
Dec 21, 2014
8
0
4,510


It doesn't allow me to do that. I have to initialize it before i can do that. Also this is hardrive connected via hdd enclosure. What can i do? I don't care about the files at all
 
did you delete all partitions before initalizing? so it was a raw disk?

crc normally corrupted data cause a hash verify to fail.
so either the initalization in the external hub is being corrupted or the hdd is doa.
take the hdd out the enclosure and put it into your pc. in most cases you just unplug it from the adapter and it will slip straight in.
boot into bios and see if it shows up. quit and make sure it shows on the splash. let windows boot and run the initalize again on the new drive.
if it works its likey you have a buggy controller board in the external housing. if not then the drive could be dead.

if all else fails you could try a low level format. but that will depend if theres a tool from the drive manufacturer or 1 for that drive model specifically.
 

Curtis CJ Lewis

Reputable
Dec 21, 2014
8
0
4,510


thanks for your responses gentlemen. I'm just going to take it to my local pc repair shop to see what they can do. Also in the event that i have to get a new external hdd, is there any good budget ones you can recommend?
 

it did show up on my account mate. i got the pm saying congrats you solved it.
now another guy has it...

 
http://www.imagebam.com/image/a6af50375127283

mate i aint bothered who got it. it not what i come here for. im just giving a heads up theres errors creeping in all over the place.
the above is a cap of my pm's to show it was selected successfully. the site as a whole has been flakey again for about 3 weeks.
i have 1 notification listed permanently but theres nothing in my notification links.
other errors. i still cant upvote most of the time. it keeps redirecting me to a blank page.
other times it will put the upvote on while others just refreshes the page without any visible sign i hit the up button.

 
Sorry Guys - I'll flag the anomalies up to the Dev team through the permanent staff member who handles these things. Tom's is under some extremely heavy Spam attacks lately and everyone is probably busy trying to block them so some of the flakiness is going unattanded. Hopefully it will soon be business as usual.