Just built a new pc. AMD 8320 ASROCK 970 extreme 3 mobo, g.skill ares 1600 ddr 3 2x4 8gb ram. PC ran fine first few days with slots a1,b1(according to the manual for required dual channel) and today I get nothing but the three beep code.
After some process of elimination, booting with one stick bit not with two. Been running one stick for a total of 4gb ram just to boot up and what not. I know about cpu-z but don't really know what to look for in particular(learning noob).
My ram doesn't seem to be physically damaged as both run individually. What am I missing here? Any help would be greatly appreciated.
Also, Slots A1,B2 are first priority for dual channel , according to the manual. Running one stick on A2 for now to just simply run
After some process of elimination, booting with one stick bit not with two. Been running one stick for a total of 4gb ram just to boot up and what not. I know about cpu-z but don't really know what to look for in particular(learning noob).
My ram doesn't seem to be physically damaged as both run individually. What am I missing here? Any help would be greatly appreciated.
Also, Slots A1,B2 are first priority for dual channel , according to the manual. Running one stick on A2 for now to just simply run