Solved

1 router, 1 server, 1 switch, 5 PCs and a wireless laptop

We are about to set up a small business network with the above hardware.
Can anyone advise on the best configuration?

Should it be:
Router - Server - Switch - PCs

Or

Router - Switch - Server and PCs

Do you need any specific info?

Many thanks in advance for your guidance
11 answers Last reply Best Answer
More about router server switch pcs wireless laptop
  1. All depends on what the 'server' is supposed to be doing.
  2. Routers these days are switches remember. With only 5PCs, a server and one laptop, if you buy a good enough router with 6 ethernet plugs, you should be able to bypass the switch in the first place.

    If you can't find a router with about 6 or 7 ethernet ports, then you'll need to buy a switch. In that case it would be:'

    router > switch > server/computers/laptop

    Edit: As said it depends on what the server is for.
  3. As @USAFRet says, your first configuration would be appropriate if the server were functioning as a firewall or proxy/filter. Your second configuration is more typical where the PCs and the server all have direct access to the router (and the internet). It just depends on what functions the server is supposed to have.
  4. No problem. The server will have EPOS/sales order processing software that needs to be accessed by the PCs
  5. I would probably set it up:
    Internet --> Router --> Switch -->Server and PCs. This assumes the switch also has the wireless port on it for the laptop.

    If the switch does NAT filtering, you may not need the router at all.
  6. Well, I wrote a post but it vanished, USA and kane are on the right track though. Personally I would avoid using the router for a switch in a business... it is just a little iffy and adds more issues to deal with. Also you should probably run dhcp and dns from your server... assuming it's your main server with AD, file and print sharing etc... which would mean disabling dhcp on the router, just remember to point the gateway in the dhcp to the router.
  7. My current router only has 4 ports, so I already purchased the switch when we added the 5th PC, it's adding in the server that's new to us
  8. Best answer
    claire arise said:
    No problem. The server will have EPOS/sales order processing software that needs to be accessed by the PCs


    Then your second config would probably work best.
  9. Fab thank you! Can't believe how quickly you guys answered!
    I might be back in a day or two when I start to set it up!

    Thanks again
  10. everything that plugs into the switch can talk to each other with no extra work required (2nd option), if you daisy chain systems than it's a little different. AKA, PC -> Switch -> Router -> Switch -> Server/PC or something similar to the first option. If you're not sure what you are doing I would recommend finding someone local that has previous experience to help you out.
  11. claire arise said:
    No problem. The server will have EPOS/sales order processing software that needs to be accessed by the PCs


    Then router > switch > server and PCs



    ^^ I must admit I am improving
Ask a new question

Read More

PCS Switch Servers Networking Routers