How to connect 4 pin Male Molex from fan controller to PSU?

Zach Buttram · Dec 24, 2014

Hi I am building my very first PC and ran into a problem. My case (NZXT Phantom ATX full tower) has a fan controller on it and I am wondering how to plug it into my power supply. It is a 4 Pin MALE Molex, but my Power supply didn't come with a female Molex... (PSU: EVGA SuperNova 750 G2) What do I do?

Picture of Molex (coming directly from the Fan Controller) : https://answers.yahoo.com/question/index?qid=20141223224033AA41IbX

RealBeast · Dec 24, 2014

Your PSU does come with one string of 4 Molex connectors, look through your bag of cables and attach it to your unit, which is fully modular.

Zach Buttram · Dec 24, 2014

RealBeast :

But I attached that to my Graphics card connectors... If that is not suppose to be there then what do I use to connect the graphics card to the PSU?

synphul · Dec 24, 2014

I looked at the cables with your psu from the pic on newegg, it has female molex (4 pins side by side, flat). That's what you plug the case fan controller into. Most video cards take a 6 or 8 pin pcie power cable (probably the one marked 'vga' in the pic on newegg). Those consist of 2 rows of 3 pins or 2 rows of 4 pins.

Update: here's a screenshot of the cables that should have come with your psu (per newegg's photos)
http://prntscr.com/5kfndw

RealBeast · Dec 24, 2014

Zach Buttram :

Your graphic card should use the 6/8 pin power connectors for video cards (pcie), and if you are somehow using your Molex connectors with adapters, use the correct cables for the video card and you will have at least one free Molex female.

Search

How to connect 4 pin Male Molex from fan controller to PSU?

Zach Buttram

Reputable

RealBeast

RealBeast

Titan

Zach Buttram

Reputable

synphul

Champion

RealBeast

Titan

TRENDING THREADS

Latest posts

Moderators online

Share this page