PC won't boot after resetting the CMOS battery

Toggle sidebar Toggle sidebar
F

Fritz Kol

Reputable
Dec 27, 2014
8
0
4,510
PC won't boot after resetting the CMOS battery. It turns on, you can see the fans spinning and hear the HD spinning but there is no output on the screen.

I unplugged the HD to see if something changed but nothing. Also replace the RAM memory but that didn't do anything.

Whats my next step?
 
Solution
smorizio
pull one ram stick and reset the gpu. also make sure the monitor is working. if there fault led on code led on the mb see if any are on also check that the 24 and 4/8 pin is conencted. also check for any dead shorts. make sure on the cmos slot the clips are not snapped off. also check that the case reset button not stuck in.
Sort by date Sort by votes
F

Fritz Kol

Reputable
Dec 27, 2014
8
0
4,510
Thanks for the fast respons. The Battery is correctly installed and I haven't touched the CMOS jumper pins so they should be on the correct spot. I just pulled the battery out and reinserted it after 10 seconds.

The systems has no onboard video

Whats my next step to check?
 
Upvote 0 Downvote
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
pull one ram stick and reset the gpu. also make sure the monitor is working. if there fault led on code led on the mb see if any are on also check that the 24 and 4/8 pin is conencted. also check for any dead shorts. make sure on the cmos slot the clips are not snapped off. also check that the case reset button not stuck in.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom