Just got a Z97 GD65 and i5 4690K yesterday. Went into the bios a couple of times. Checked both bios's worked, they did. Went in this morning with the intent to install windows and bios A gives post code A2 and the screen says "Boot guard verification dxe is fail" and shuts off.
Bios B works after 4 mins of north ( or south i forgot ) bridge initialising.
I have tried unplugging everything but 4GB ram keyboard mouse cpu psu, but still nothing.
I updated bios B with m flash via usb and it updated hoping it would update both and fix the issue but nothing changed (apart from bios b getting an update)
So basically is bios A bricked? And why! Also how do / can i fix it?
Also why does bios b take so long to boot into the bios? It gives code 71 on the board
Thanks told by a friend Toms Hardware forum is heelpful
System specs
MSI Z97 GD-65
i5 4690K stock speed
256GB Crucuial mx 100 ssd
500GB HHD
ihas 124 c dvd drive
no GPU
h60 water cooler
zalman z9+ case
2*4GB G skill 1333MHz ram
Bios B works after 4 mins of north ( or south i forgot ) bridge initialising.
I have tried unplugging everything but 4GB ram keyboard mouse cpu psu, but still nothing.
I updated bios B with m flash via usb and it updated hoping it would update both and fix the issue but nothing changed (apart from bios b getting an update)
So basically is bios A bricked? And why! Also how do / can i fix it?
Also why does bios b take so long to boot into the bios? It gives code 71 on the board
Thanks told by a friend Toms Hardware forum is heelpful
System specs
MSI Z97 GD-65
i5 4690K stock speed
256GB Crucuial mx 100 ssd
500GB HHD
ihas 124 c dvd drive
no GPU
h60 water cooler
zalman z9+ case
2*4GB G skill 1333MHz ram