- Sep 2, 2013
- 47
- 0
- 10,540
Today i installed 212 evo on my gd65 990fx and 8350 processor,while doing so i had to plug off all attached to mobo and then reatached it,when i first started computer after retaching i saw smoke comming out of hard disk and fastly disabled power supply to stop it,but now when i plug white part of cable which goes from mobo to hard disk (little white cable) everything starts up but when i try to plug (i think its double bigger in lenght and it goes from plug next to processor and into hard disk) my computer doesnt even start but when i plug it off everythings goes perfect (ofc theres no booting but i get this message
EFI Shell Version 2.31 [4.633] Current running mode 1.1.2 Map: Cannot find required ma name
Press Esc in 5 seconds to skip startup.nsh, any other key to continue
i have 500 gb hitachi storage which is about 6-7 years old and was working perfectly
after my mobo logo goes i get efi message i wrote and thats about it,please someone give me advices about this since i have about 100 gigs of video editing i was doing
my full specs
R9 280X overklokovana na 1150
Procesor:AMD 8350
212 EVO
RAM:2x4GB Patriot Viper 3
Maticna ploca:990FXA-GD65
630w thermaltake powersupply
EFI Shell Version 2.31 [4.633] Current running mode 1.1.2 Map: Cannot find required ma name
Press Esc in 5 seconds to skip startup.nsh, any other key to continue
i have 500 gb hitachi storage which is about 6-7 years old and was working perfectly
after my mobo logo goes i get efi message i wrote and thats about it,please someone give me advices about this since i have about 100 gigs of video editing i was doing
my full specs
R9 280X overklokovana na 1150
Procesor:AMD 8350
212 EVO
RAM:2x4GB Patriot Viper 3
Maticna ploca:990FXA-GD65
630w thermaltake powersupply
Facebook
Twitter
Instagram