Hello,
so i would need help with xmp profiles. My ram speed is 2400mhz and in the bios it shows it as 1333mhz. So i enabled xmp profile1 and it is 2400mhz. And everything used to work fine. But like after 2weeks it started to say ram overclocking failed and computer wouldn`t boot. So then i took it away and have been using my ram in 1333mhz for a while. I am not totally sure but this problem might have occured after i did a bios update but it might have even be before the bios update. I cant properly remember was it before or after the update. Now it would be great if somebody could say what i should do. Do i have to manually enter my ram speeds or should i try xmp again. I would greatly appreciate for help. Sorry if my english is bad i am not a native english speaker. Thank you in advance.
2X Kingston HyperX Predator 8 GB (2 x 4 GB) 2400 MHz DDR3 CL11, i have 16gb in total
And if these parts would help:
INTEL Core i7 3820 3,6 GHz
Asus P9X79
so i would need help with xmp profiles. My ram speed is 2400mhz and in the bios it shows it as 1333mhz. So i enabled xmp profile1 and it is 2400mhz. And everything used to work fine. But like after 2weeks it started to say ram overclocking failed and computer wouldn`t boot. So then i took it away and have been using my ram in 1333mhz for a while. I am not totally sure but this problem might have occured after i did a bios update but it might have even be before the bios update. I cant properly remember was it before or after the update. Now it would be great if somebody could say what i should do. Do i have to manually enter my ram speeds or should i try xmp again. I would greatly appreciate for help. Sorry if my english is bad i am not a native english speaker. Thank you in advance.
2X Kingston HyperX Predator 8 GB (2 x 4 GB) 2400 MHz DDR3 CL11, i have 16gb in total
And if these parts would help:
INTEL Core i7 3820 3,6 GHz
Asus P9X79