black screen after upgrading CPU

Toggle sidebar Toggle sidebar
T

toni1992

Honorable
Feb 8, 2014
10
0
10,520
Hi guys,

sorry for my bad English

My PC spec

motherboard
http://www.gigabyte.com/products/product-page.aspx?pid=3135#ov

ram
2*1 kingston 1giga ddr2 800 hz

old cpu

http://ark.intel.com/products/27129/Intel-Celeron-D-Processor-352-512K-Cache-3_20-GHz-533-MHz-FSB

new cpu
http://ark.intel.com/products/41493/Intel-Pentium-Processor-E6300-2M-Cache-2_80-GHz-1066-MHz-FSB

OS : Tried both win 7 and win xp

the new CPU have been tested and fully working in another pc

after installing latest bios with old CPU ; the MB was still working
but after installing the new CPU
screen went black after removing battery i found out that bios failed to load after resetting it the motherboard work until i reset every time and remove the battery

i tested the MB with different PSU ,CPU , RAM and still the result the same only the old CPU is the one working
any higher CPU it will do the same.

what should i do ?
 
Sort by date Sort by votes
G

GhislainG

Titan
Jul 16, 2008
23,962
5
74,965
Did you mean to write (punctuation helps in any language) "After installing the latest BIOS with the old CPU, the MB was still working, but after installing the new CPU the screen is black. After removing the battery I found out that the BIOS failed to load after resetting it; the motherboard works until I reset every time and remove the battery" Please clarify what you mean with the last sentence. Do you mean that the system works fine (I presume so if you tested with XP and 7), but you have to reset the BIOS settings whenever you power off the system? If so, after resetting the BIOS while the E6300 is installed, did you save the default BIOS configuration by pressing F10?
 
Upvote 0 Downvote
T

toni1992

Honorable
Feb 8, 2014
10
0
10,520


first of all thanks for replying
for (After installing the latest BIOS with the old CPU, the MB was still working)
last time updated BIOS the version was FC ,so i updated to FJ version to have the latest and that was with my old CPU and Motherboard working fine until i installed the new CPU
for reseting BIOS
each time to make the system work i need to remove the battery then stick one ram and keyboard , vga cable ,PSU
system enter the failed BIOS page then enter after adding battery after resetting bios
system won't work until i remove battery then it work
i changed battery even reflash Bios but still same
each time inorder to enter windows (for that part i tried 2 hard disk one has win7 and other has xp sp3)
for saving bios i saved but i need to cutoff the power each time in order to make the black screen disappear because when i tried to make with battery only black screen that appear

for the punctuation
sorry it's habit because I'm programmer
 
Upvote 0 Downvote
T

toni1992

Honorable
Feb 8, 2014
10
0
10,520
after searching and reading manuals may be my psu can't provide the system because my psu actual watt is 200 watt but according to intel data the old cpu require more watt and its working.
 
Upvote 0 Downvote
T

toni1992

Honorable
Feb 8, 2014
10
0
10,520
e5200 didn't work on my MB
but e6300 worked fine in her MB
but after i returned her e 5200 to her MB
its doing the same as my MB now
sorry but what happen was a shock
i couldn't described in words for me
my language is Arabic and I'm used to use punctuation only when writing codes
sorry about not using punctuation
and thanks for help
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom