System for heavy use of graphical modelling, rendering and simulation.

Toggle sidebar Toggle sidebar
A

asdjei

Honorable
Feb 8, 2013
16
0
10,510
I'm planning to buy a rig which shall be mainly used for graphical modelling, rendering and simulation softwares like ANSYS, NASTRAN, ADAMS, SolidEdge and other similar softwares.

Could someone please suggest a configuration for me? My overall budget is around 60,000INR (Indian rupees). That's close to 1000 USD.

Thanks!
 
Solution
DonkeyOatie
That will be a challenge. A Xeon 1231 will give you hyperthreading and quad core cheaper than an i7, you need 16Gb of memory, preferably ECC and a motherboard to run them, enough storage, and only you know how much, a basic discrete GPU to drive the display (GTX750ti is good and comparatively inexpensive) but you may need to go much cheaper than that. A Good 350 to 450W PSU will be enough, a cheap cabinet, monitor, keyboard, and then there's the OS.

I have configured enough systems to know that all that will not fit into 60,000 Rs. Where can you compromise?
Sort by date Sort by votes
DonkeyOatie

DonkeyOatie

Champion
Sep 16, 2014
12,141
1
50,960
That will be a challenge. A Xeon 1231 will give you hyperthreading and quad core cheaper than an i7, you need 16Gb of memory, preferably ECC and a motherboard to run them, enough storage, and only you know how much, a basic discrete GPU to drive the display (GTX750ti is good and comparatively inexpensive) but you may need to go much cheaper than that. A Good 350 to 450W PSU will be enough, a cheap cabinet, monitor, keyboard, and then there's the OS.

I have configured enough systems to know that all that will not fit into 60,000 Rs. Where can you compromise?
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom