I decided to build my first PC and I wanted to test out my machine before I lodged it into the case so I have a Asus Vanguard B85 motherboard, only touched it when I was grounded, my Intel i5 4440 CPU and stock CPU fan, my Geforce GTX 960 graphics card, and my 2x4GB RAM. I have the 500w Power Supply plugged into the 24Pin on the Mobo as well as plugged into the CPU slot and into my graphics card. I also have my CPU fan plugged into my mobo.
I have everything that needs plugged in and secured everything right, but when I power up the Power Supply the fan on the power supply or the CPU fan do not start up. The Motherboard however does have a light up LED indicating that it is getting power when I switch the Power Supply on. I also plugged in fans from the case itself into the motherboard and they will not start up either.
What could be the reason why my build isn't powering up I tested the Power Supply with the paper clip test and the fan will start up then. I then plugged my build into a monitor to see if anything would pop up, but it says it didn't find anything. What could be causing this issue?
I have everything that needs plugged in and secured everything right, but when I power up the Power Supply the fan on the power supply or the CPU fan do not start up. The Motherboard however does have a light up LED indicating that it is getting power when I switch the Power Supply on. I also plugged in fans from the case itself into the motherboard and they will not start up either.
What could be the reason why my build isn't powering up I tested the Power Supply with the paper clip test and the fan will start up then. I then plugged my build into a monitor to see if anything would pop up, but it says it didn't find anything. What could be causing this issue?
Facebook
Twitter
Instagram