- Jan 25, 2015
- 60
- 0
- 18,530
Hi. recently installed a new samsung SSD, and then decided to test it using AS SSD benchmark device.
It read "pciide - Bad"
I looked at some forums that suggested I go into BIOS -integrated peripherals - onchip - PATA/SATA devices, and change the SATA setting from IDE to AHCI
there was no option to do so, only and "enable/disable" option.
But there was a AHCI option on the RAID mode just beneath it.
I changed the RAID option top AHCI from IDE, figuring I don't have a raid array and it might adjust the whole system, so what the hell, and restarted and rebooted at instructed.
Just re-tested my speeds using AS SSD benchmark again, and got the same "pciide - BAD" message.
Am I not getting best speeds? does all this mean nothing? What should I do?
Thanks!
The entire results are as follows:
________________________________
EXM01B6Q
pciide - BAD
103424 K - OK
238.47 GB
SEQ: 11.19 MB/s read, 108.84 MB/s write
4K: 19.28 MB/s read, 24.11 MB/s Write
4K-64THRD: 23.02 MB/s read, 30.26 MB/s Write
Acc time: 0.133 ms read, 0.115 ms write
SCORE
READ - 54 WRITE 65
155
Thanks.
IB
Board: MSI MS - 7640 (890FXA-GD70)
Sys: Windows 7 Ultimate 64-bit (6.1 Build 7600)
Processor AMD Phenom (tm) II X4 965 Processor (4 CPUs), ~3.4GHz
Memory 16GB RAM
Samsung 850 Pro 256GB 2.5-Inch SATA III Internal SSD (MZ-7KE256BW)
Western Digital 3 TB SATA III 7200 RPM 64 MB Cache Bulk/OEM Desktop Hard Drive, Black, WD3003FZEX
It read "pciide - Bad"
I looked at some forums that suggested I go into BIOS -integrated peripherals - onchip - PATA/SATA devices, and change the SATA setting from IDE to AHCI
there was no option to do so, only and "enable/disable" option.
But there was a AHCI option on the RAID mode just beneath it.
I changed the RAID option top AHCI from IDE, figuring I don't have a raid array and it might adjust the whole system, so what the hell, and restarted and rebooted at instructed.
Just re-tested my speeds using AS SSD benchmark again, and got the same "pciide - BAD" message.
Am I not getting best speeds? does all this mean nothing? What should I do?
Thanks!
The entire results are as follows:
________________________________
EXM01B6Q
pciide - BAD
103424 K - OK
238.47 GB
SEQ: 11.19 MB/s read, 108.84 MB/s write
4K: 19.28 MB/s read, 24.11 MB/s Write
4K-64THRD: 23.02 MB/s read, 30.26 MB/s Write
Acc time: 0.133 ms read, 0.115 ms write
SCORE
READ - 54 WRITE 65
155
Thanks.
IB
Board: MSI MS - 7640 (890FXA-GD70)
Sys: Windows 7 Ultimate 64-bit (6.1 Build 7600)
Processor AMD Phenom (tm) II X4 965 Processor (4 CPUs), ~3.4GHz
Memory 16GB RAM
Samsung 850 Pro 256GB 2.5-Inch SATA III Internal SSD (MZ-7KE256BW)
Western Digital 3 TB SATA III 7200 RPM 64 MB Cache Bulk/OEM Desktop Hard Drive, Black, WD3003FZEX
Facebook
Twitter
Instagram