IsKingston HyperX FURY 8GB Kit (2x4GB) 1866MHz DDR3 CL10 DIMM - Black (HX318C10FBK2/8) compatible with gigabyte GA-UD7 990-FXA

WinshesteR · Feb 4, 2015

Hey,
Bought a pear of Kingston HyperX FURY 2x4gb rams (Kingston HyperX FURY 8GB Kit (2x4GB) 1866MHz DDR3 CL10 DIMM - Black (HX318C10FBK2/8)) and I downloaded the memory compatibility page from gigabyte and I know it says they didn't test all but I would like to know if I can trust on using them without causing any malfunction on my system. They haven't arrived yet but they are on their way home.

Ps: I will use the together with 2 old others 1 is a Kingston 2gb probably stock and 2gb generic.

GianMarco Douglas · Feb 4, 2015

Yes, usually all motherboards are compatible with ram as long as mobo support ddr3 and your ram is the same as well. By the way nice choice as you can use your ram at 1866 without overclocking it. All frequencies are compatible but if mobo supports a lower one, then ram frequency will be lowered ( mobo max = 1600, Ram 2133. Ram will in be used at 1600). I hope That this Was helpful

Dark Lord of Tech · Feb 4, 2015

More than likely they are compatible the QVL lists are never fully updated.

Tradesman1 · Feb 4, 2015

May well have to set the DRAM up manually, the Fury line uses PnP for basic setup - it tries to set itself up so 1866 will depend on if the CPU can handle it and if the BIOS is ready for it - as far as mixing with your other DRAM - if it's 1600 or better and not the Fury line then will prob have to try and set all up manually or if they play at install will prob run at 1066 or 1333

Search

IsKingston HyperX FURY 8GB Kit (2x4GB) 1866MHz DDR3 CL10 DIMM - Black (HX318C10FBK2/8) compatible with gigabyte GA-UD7 990-FXA

WinshesteR

Reputable

GianMarco Douglas

GianMarco Douglas

Honorable

Dark Lord of Tech

Retired Moderator

Tradesman1

Legenda in Aeternum

TRENDING THREADS

Latest posts

Moderators online

Share this page