Gpu fan spinning Display not working

Vlad1156

Honorable
Feb 7, 2015
64
0
10,640
Hey guys I have an MSI Radeon HD7850 and Samsung Syncmaster 2243SN all the things were good since i disconnected from the motherboard and connected my gpu to a friend motherboard.When i connected back to my motherboard The screen was showing this message and black screen only for some seconds"Not optimum mode.Recomended mode 1920x1080 60 hz"and than the display appear to be disconnected.Might be DVi port on the gpu?I think that some pins are a little broked im not sure only one i think.PS I USE ADAPTOR VGA TO DVI.
129.jpg
[/URL][/img]

130.jpg
[/URL][/img]

131.jpg
[/URL][/img]
 
Solution
Sounds like the card is toast. Have you tried using a different connector on the card? Like HDMI? Try different DVI cables. I have not heard of people breaking pins off in the GPU. I have dial monitors (both DVI). I unplug them multiple times a week and have never broken anything.

CreepyBobo346

Reputable
Dec 6, 2014
566
0
5,010
Your message means that your GPU can't handle the 1080P resolution (This is unlikely since it is an HD 7850) or your settings aren't optimized for the 1080P 60Hz resolution and refresh rate.

A VGA to DVI adapter?
I think you should get one that is DVI to VGA adapter, and if the VGA to DVI works with both display outputs, then don't get another adapter.

But buy another card if even 1 pin the broken, it is cheap:
Affiliate link removed.
 

Vlad1156

Honorable
Feb 7, 2015
64
0
10,640
I looked better and the pin was a little moved and I moved back to its position.Yes the gpu is properly installed I test it on 2 computers no signal on destktop installed abother gpu on the ssame build everything works 100%
 
Sounds like the card is toast. Have you tried using a different connector on the card? Like HDMI? Try different DVI cables. I have not heard of people breaking pins off in the GPU. I have dial monitors (both DVI). I unplug them multiple times a week and have never broken anything.
 
Solution

TRENDING THREADS