Hi all, i have a weird problem with my xfx hd6870 dual fan edition.
When i turn on the pc, fan is at 100% on the gpu, also when the pc is booted, under gpuz/amd overdrive it shows 31% or whatever it is, but the fan is at 100% (i know, it's loud!) also, gpuz doesnt read fan rpm, it is just --.
Temps ate great, 30C in idle, obviously because its freakin loud, i tried the manual fan control but it doesn't help, it just stays on 100%.
Also, from time to time it settles down, but just for 2-3 minutes, then starts acting crazy again, i tried reflashing bios using custom fan settings in rbe, but didn't help, i checked if the fan conector sits good on the pcb, and it is good also.
What the hell could be the problem, it just started acting crazy all of a sudden, also i tried megaclean install of stock, and latest omega 14.12 drivers, nothing, still crazy and still starts uo at 100%.
Could something on the conector be broken? I never disasembled it, it was the first time today to see if the conectors are seated good, also to clean it up a bit.
Rest of conponents
650W psu
C2d e7300 @3.5ghz
6Gb ddr3 ram
Mbo, gigabyte haha...
Also to update...Wehn i run furmark, and when the temps hit 65C fan starts throttling from 100 to 50%, and then on 73C it stabilizes and runs normal (i can adjust it via overdrive or afterburner), then again it spins up to 100% all of a sudden, then i run furmark again, the same thing happens and then fan stays like that for 5h (i tested so far), and still runs good. When i restart my PC, problem happens again.
I did a fresh install again of all the drivers, cleaned before with DDU, didn't help, i dissasembled the card again, checked all the connectors, everything in place, there are two pins, in one pin 2 red wires, in other 2 black wires, i am going crazy and looking for aftermarket coolers, is there any way to sort this out?
Please guide me up guys, what could be the problem? Thx in front
When i turn on the pc, fan is at 100% on the gpu, also when the pc is booted, under gpuz/amd overdrive it shows 31% or whatever it is, but the fan is at 100% (i know, it's loud!) also, gpuz doesnt read fan rpm, it is just --.
Temps ate great, 30C in idle, obviously because its freakin loud, i tried the manual fan control but it doesn't help, it just stays on 100%.
Also, from time to time it settles down, but just for 2-3 minutes, then starts acting crazy again, i tried reflashing bios using custom fan settings in rbe, but didn't help, i checked if the fan conector sits good on the pcb, and it is good also.
What the hell could be the problem, it just started acting crazy all of a sudden, also i tried megaclean install of stock, and latest omega 14.12 drivers, nothing, still crazy and still starts uo at 100%.
Could something on the conector be broken? I never disasembled it, it was the first time today to see if the conectors are seated good, also to clean it up a bit.
Rest of conponents
650W psu
C2d e7300 @3.5ghz
6Gb ddr3 ram
Mbo, gigabyte haha...
Also to update...Wehn i run furmark, and when the temps hit 65C fan starts throttling from 100 to 50%, and then on 73C it stabilizes and runs normal (i can adjust it via overdrive or afterburner), then again it spins up to 100% all of a sudden, then i run furmark again, the same thing happens and then fan stays like that for 5h (i tested so far), and still runs good. When i restart my PC, problem happens again.
I did a fresh install again of all the drivers, cleaned before with DDU, didn't help, i dissasembled the card again, checked all the connectors, everything in place, there are two pins, in one pin 2 red wires, in other 2 black wires, i am going crazy and looking for aftermarket coolers, is there any way to sort this out?
Please guide me up guys, what could be the problem? Thx in front
Facebook
Twitter
Instagram