- Feb 11, 2015
- 7
- 0
- 4,510
Sorry in advance if I posted this in the wrong thread
hey everyone question for you guys. doing my second custom PC build and running into a problem of it not turning on. I made sure everything was plugged in the right spots and that the connection(s) were solid however, when i go to push the power button nothing happens. The fans don't spin no post nothing just dead. Now if i do the PSU paper clip test my cooling fans will spin but when anything else is added like CPU or CD/DVD drive it wont do anything. Any ideas and help would be appreciated. Thanks in advance.
Here is my part list
ASUS SABERTOOTH 990FX Mother Board
AMD FD8350FRHKBOX FX-8350 FX CPU
Sapphire Radeon VAPOR-X R9 290 GPU
16 gigs DDR3 RAM (4 sticks 4gigs each)
WD Blue Desktop Hard Drive 1TB
Asus 24x DVD-RW
Corsair CX Series 750 Watt PSU
Thanks again for the help
hey everyone question for you guys. doing my second custom PC build and running into a problem of it not turning on. I made sure everything was plugged in the right spots and that the connection(s) were solid however, when i go to push the power button nothing happens. The fans don't spin no post nothing just dead. Now if i do the PSU paper clip test my cooling fans will spin but when anything else is added like CPU or CD/DVD drive it wont do anything. Any ideas and help would be appreciated. Thanks in advance.
Here is my part list
ASUS SABERTOOTH 990FX Mother Board
AMD FD8350FRHKBOX FX-8350 FX CPU
Sapphire Radeon VAPOR-X R9 290 GPU
16 gigs DDR3 RAM (4 sticks 4gigs each)
WD Blue Desktop Hard Drive 1TB
Asus 24x DVD-RW
Corsair CX Series 750 Watt PSU
Thanks again for the help
Facebook
Twitter
Instagram