Computer powers on then off after changing dram timings

Toggle sidebar Toggle sidebar
M

Manos Liakos

Reputable
Jan 24, 2015
78
0
4,640
Did a wrong modification in BIOS RAM timings (tRAS,tRTP,tRFC,tWR and all that stuff) and now system turns on and after 3-4 seconds off and then restarts and does the same untill you plug off the PSU. It won't even enter the BIOS sreen anymore. Do I have to reset my mobo? Please help.
 
Solution
vagrantsoul
would flash your cmos, either with a handy button that some come with, or by a jumper / removing the power (via psu- unplug or flip switch) and removing the button battery for a few seconds. Your manual should state how to flash the cmos... should let you reconfig the bios when you power it back up.
Sort by date Sort by votes
vagrantsoul

vagrantsoul

Distinguished
Oct 14, 2010
659
0
19,360
would flash your cmos, either with a handy button that some come with, or by a jumper / removing the power (via psu- unplug or flip switch) and removing the button battery for a few seconds. Your manual should state how to flash the cmos... should let you reconfig the bios when you power it back up.
 
Upvote 0 Downvote
Solution
M

Manos Liakos

Reputable
Jan 24, 2015
78
0
4,640
there's no jumper so I just picked out the battery and placed it back, it now boots normally (just a 3-beep noise indicating the open case). i closed the case but the monitor isn't recognised
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom