I have Asus M5A97 and Phenom II X6 1055t. I overclocked my CPU to 3.5ghz using just 4 cores (normally it has 6 cores, but i find it unnecessary for gaming and temp rises so i disabled 2 cores), but my RAM settings are not good i think. I use it on 1333mhz (dual-channel, 2x4). I know how to increase my ram to 1600 mhz, but timings, voltage etc. are not optimized. I need a good explanation and best settings for my setup. Thanks.
I don't know how to send pictures here so i'll write my ram settings according to CPU-Z.
DC Mode : Unganged
NB Frequency = 2500mhz
DRAM Frequency = 668mhz
FSB DRAM = 3:8
CAS Latency (CL) = 8.0
RAS to CAS Delay (tRCD) = 8
RAS Precharge (tRP) = 8
Cycle Time (tRAS) = 20
Bank Cycle Time = 27
Command Rate (CR) = 1T
My RAMs work at 1.5v
I don't know how to send pictures here so i'll write my ram settings according to CPU-Z.
DC Mode : Unganged
NB Frequency = 2500mhz
DRAM Frequency = 668mhz
FSB DRAM = 3:8
CAS Latency (CL) = 8.0
RAS to CAS Delay (tRCD) = 8
RAS Precharge (tRP) = 8
Cycle Time (tRAS) = 20
Bank Cycle Time = 27
Command Rate (CR) = 1T
My RAMs work at 1.5v