Finally got new build to POST/ BIOS screen but...now its not showing up again

JNGUYEN89

Reputable
Feb 16, 2015
3
0
4,510
Build:
AMD FX8350
MSI MOBO 970A-G46
ADATA XPG 8GB DDR3 RAM (1 STICK)
ZOTAC GTX750 1GB VIDEO CARD
SAMSUNG EVO 120GB SSD
WD 1TB HD

Anyways...so I was following the sticky checklist perform these steps
and at first I forgot to plug in the 8 pin CPU power adapter to the mobo...but I've since figured it out and got my computer to POST/ get to the BIOS screen...problem is now I had turned it off for the night waiting on my copy of windows to get here and when I turned it back on...the computer would no longer display any sort of video output...so back to square one...I didn't change any of the wiring. I tried reinstalling everything, double checking all the plugs this time to ensure I didnt miss anything this time around but it still wont load. The monitor goes straight into power saver mode. I also tried jumping the CMOS...however still no luck...I am on the verge of just quitting and sending everything back. The only thing I can think of is after getting the bios to go I noticed my front fan (part of my case wasnt running so I connected one of the power adapters from my PSU (molex connection btw) to the fan...what I noticed was was that whenever I tried to turn it on with the front fan connected the computer would turn on for a split second and shut down instantly..making me think that the PSU doesnt have enough wattage to have the front fan running. So I disconnected the front fan and the computer powered back on fine...BIOS running and all...so ....yea...any ideas?? oh additionally I installed the cpu speaker (little beeper mic or whatever) but it never beeps???? even when the BIOS ran.

Additionally I've tried moving the graphics card to a different pci-e slot as well as switching the slot of the RAM stick..Please someone help me :(