Build for wife ( $800-1000)(basic video editing and audio production)

kasper17

Reputable
Feb 27, 2015
3
0
4,510
Haha she wants the pink one. So no special sound card is needed? Just a ordinary 15-30 dollar one? She is just starting to want to record her voice and such, she plans on buying a $240 mic, not sure which exactly but can I assume it will plug into the regular mic port? Thanks for the responses, I didn't want her to buy all this blind.
 

eatmypie

Honorable
Sep 12, 2013
1,179
0
11,660
If you do anything with audio just get a sound card that runs of USB for the least amount of interference as possible, anything inside will cause noise, just buy a usb one and try to run the cable away from the computer.
 
If the Microphone is USB then doesnt matter what audio gear you have the sound quality wont change, everything is happening inside the mic.
If its 3.5 or 5.25mm a higher quality DAC could make a difference, though I doubt by much. That being said I am no audiophile, so could be wrong.

If its 5.25mm you will also need an adapter or something that natively supports it as well, most stuff is 3.5mm.
 

eatmypie

Honorable
Sep 12, 2013
1,179
0
11,660
You are wrong, anything inside the case even a dedicated card acts like a receiver and picks up the noise from everything inside. You need to get a good quality audio solution that you can set somewhere away from the computer. The on board is great for the most part but if the op's wife is doing something mildly professional it would be to their benefit to get one that runs off USB with a few other devices.
 

kasper17

Reputable
Feb 27, 2015
3
0
4,510
http://www.audio-technica.com/cms/wired_mics/c75c5918ed57a8d0/

That's the mic, I guess it is simply usb. She is saying she just wants to record her voice not really any instruments just yet. Don't know if that helps. Also i dont understand what you mean by, run usb to a alternate source from the case. Sorry if it's actually simple.
 
Sound is inherently analogue but USB can only carry a digital signal. So there must be a DAC (Digital to Analogue Converter) in the mic itself if it has a USB output. Digital signals inherently don't degrade or get messed with by ambient interference (a 1 or 0 is going to be a 1 or 0 no matter how garbled it is).

tl;dr
The mic has a USB output, you dont need any fancy audio gear as far as the mic is concerned.