Pc wont boot after cmos reset

When I intially powered up my pc (without the gpu,adaptor or hdd), it was completey fine. After I plugged in a hdd, the pc refused to start and continued to refuse to start up even after I removed it. So i tried to reset the cmos (I made sure to unplug the psu from the wall and turn everything off beforehand) and after I did this, the fans spin for a second or two but no other signs of power is present afterwards.
My build is:

CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor

Motherboard: MSI Z87-G41 PC Mate ATX LGA1150 Motherboard

Memory: Patriot Signature 8GB (2 x 4GB) DDR3-1600 Memory

Storage: Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive

Video Card: XFX Radeon R9 280X 3GB Double Dissipation Video Card

Case: BitFenix Neos Black ATX Mid Tower Case

Power Supply: Corsair CX 600W 80+ Bronze Certified Semi-Modular ATX Power Supply

Wireless Network Adapter: TP-Link TL-WN881ND 802.11b/g/n PCI-Express x1 Wi-Fi Adapter
3 answers Last reply
More about wont boot cmos reset
  1. Your parts list looks OK except for the poor quality PSU.

    What OS? What monitor?

    Make sure you've connected everything correctly per http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems
  2. anonymous1 said:
    with nothing added (GPU,HDD,adaptor) I would reset CMOS again and retry the board. how are you doing the CMOS reset jumper or battery?


    I reset using the jumper
Ask a new question

Read More

Hard Drives Systems