I have recently changed my MOBO to an GA-78LMT-USB3 (rev 5.0) with 4GB of RAM, a Markvision 4GB DDR3 1333MHz (BMD34096M1333C9), and even more recently, i got another stick of ram, the same one. Here's the possibilities i have tried:
-OLD on 1 / NEW on 2
-OLD on 2 / NEW on 3
-OLD on 3 / NEW on 4
-OLD on 4 / NEW on 1
And it doesn't matter what stick in what position, it only boots if there is only 1 stick on the slot.
I have already increased the voltage to 1.510v and had the same results
Here are some specs:
Gigabyte GA-78LMT-USB3 (rev 5.0)
AMD Phenom 965 X4 @ 3.4Ghz (AM3)
Markvision 4GB DDR3 1333MHz
EVGA GTX 660 3GB
BIOS version FA
500w PSU
Windows 7 64x
-OLD on 1 / NEW on 2
-OLD on 2 / NEW on 3
-OLD on 3 / NEW on 4
-OLD on 4 / NEW on 1
And it doesn't matter what stick in what position, it only boots if there is only 1 stick on the slot.
I have already increased the voltage to 1.510v and had the same results
Here are some specs:
Gigabyte GA-78LMT-USB3 (rev 5.0)
AMD Phenom 965 X4 @ 3.4Ghz (AM3)
Markvision 4GB DDR3 1333MHz
EVGA GTX 660 3GB
BIOS version FA
500w PSU
Windows 7 64x
Facebook
Twitter
Instagram