AMD FX-8320 Overclock CPU @ 70 centigrade and MOBO @ 35 centigrade

ChaosDuck

Reputable
Mar 8, 2015
9
0
4,510
Hello,
please can someone tell me if these are safe temperatures?
I over-clocked my cpu from 3.5GHz to 3.8GHz running on the stock cooler, and I ran a stress test on AIDA64 Extreme. My PC didn't crash once and i ran the stress test for 10 minutes without stopping or pausing and the temperature was at 68-70 on the CPU and the Motherboard was at 32.
here are 2 screen shots
http://imgur.com/Ch99wxb
http://imgur.com/YhsuOdX

Im afraid to keep this overclock because I don't want to ruin my CPU and motherboard but I also want to play Planetside 2 without lag since if I run at default clock i get like 25 FPS but when I OC to 3.8GHz I get around 65-70 fps.
 
Solution
Assuming those temps are accurate, they don't seems dangerous. The CPU might throttle if it goes over 70 to stop itself from overheating.

That much of a performance difference from a less than 10% overclock does seem a little suspicious though. A roughly 200% increase in performance from that is just ridiculous. There has to be something else going on to allow such a huge performance increase.
Assuming those temps are accurate, they don't seems dangerous. The CPU might throttle if it goes over 70 to stop itself from overheating.

That much of a performance difference from a less than 10% overclock does seem a little suspicious though. A roughly 200% increase in performance from that is just ridiculous. There has to be something else going on to allow such a huge performance increase.
 
Solution

ChaosDuck

Reputable
Mar 8, 2015
9
0
4,510


thank you, also i have a really shitty gpu (GT 430) but i get like 50 fps most of the time even with explosions around me and like 20 friendly players with me.also the temperature doesnt go above 60 centigrade when im playing planetside 2, i been playing for around 1-2 hours now
 

ChaosDuck

Reputable
Mar 8, 2015
9
0
4,510


hey also do you think i should overclock a bit more?
this is the overclock without me even touching the cpu/nb voltage.