Do I need an aftermarket cooler right away? (First Buil)

Solution


A stock cooler is not necessary at all if you're not overclocking. It'll just be louder and your CPU will run a little hotter, but no damage will be done to your CPU unless you're really beating it up with constant full loads and cranking up the temperature.

jheuer

Reputable
Feb 23, 2015
66
0
4,630



How about something a little cheaper? Will this do?
http://pcpartpicker.com/part/corsair-cpu-cooler-h60cw9060007ww
 
Mar 9, 2015
30
0
4,540



that liquid cooler is very loud , linked a nice one above..........

 

yumri

Distinguished
Sep 5, 2010
703
0
19,160
i do not think you will need one until you start overclocking and to that i will suggest buying the aftermarket cooler before hand instead of using stock cooling so you do not have to disassemble it then take off the stock cooler clean the CPU of the pre-applied thermal paste then apply more and apply the aftermarket one. it will be a small increase in cost at the get go but if you are planning on overclocking then you will need to anyways.
 

Entomber

Admirable


A stock cooler is not necessary at all if you're not overclocking. It'll just be louder and your CPU will run a little hotter, but no damage will be done to your CPU unless you're really beating it up with constant full loads and cranking up the temperature.
 
Solution

jheuer

Reputable
Feb 23, 2015
66
0
4,630


I've already spent enough for now so I'll just put it together with the stock cooler, I may not overclock for a long time anyway just because it's my first build and I have no idea what that does besides performance increase.

 

EagleDesignInc

Reputable
Feb 4, 2015
231
0
4,760


Corsair is one of the best Water Cooling... Read the reviews on YouTube.
I have build 2 systems already with H100i and going for the 3rd one.

It is a little loud when you first turn on the machine, but then slows down. And it can be controlled thru Corsair Link Software included.
 

jheuer

Reputable
Feb 23, 2015
66
0
4,630


Yes but it's $100 extra money spent on something I don't really need. Is removing the stock and putting in an aftermarket really that much of a hasle?
 

Entomber

Admirable
Depending on your case design, it may or may not be a pretty big hassle. I know that when I replaced my stock cooler on my first build I had to completely remove the motherboard in order to seat the aftermarket cooler (a lot of them, including the H100i, have a backplate that must be attached to the back of the motherboard, which is generally inaccessible unless it's removed from the case).

To unscrew the motherboard you need to detach everything from it so it becomes almost like you're building your whole computer again.
 

TRENDING THREADS