Hello, I'm totally new in building computers but I finally got to assemble my first PC. The problem is when I power it, the red DRAM led flashes on and gives me 1 long and 2 short beeps, and of course, no video output.
My build is the following: http://pcpartpicker.com/p/sJsFyc
What I already did:
- Try only with one RAM module and switch it through the slots.
- Take off the video card and connect monitor to motherboard switch.
- Double check everything is connected, press every connector already in the motherboard.
- Press the MemOK button.
- Switch from DVI to VGA and vice versa.
- Motherboard standoff's are in place.
- PSU, case fans, CPU fan power on OK.
All with no luck.
Please, any help will be greatly appreciated!
My build is the following: http://pcpartpicker.com/p/sJsFyc
What I already did:
- Try only with one RAM module and switch it through the slots.
- Take off the video card and connect monitor to motherboard switch.
- Double check everything is connected, press every connector already in the motherboard.
- Press the MemOK button.
- Switch from DVI to VGA and vice versa.
- Motherboard standoff's are in place.
- PSU, case fans, CPU fan power on OK.
All with no luck.
Please, any help will be greatly appreciated!