What happened?
Me and some friend were playing DayZ. I had 30-40 FPS, so naturally I wanted to change that. I went to video settings and put everything to low, as well as render resolution and interface resolution. I didn't like to have interface resolution at 800x600, so I changed it back (1920x1080). I changed the render resolution but I mispressed the right resolution, so I quickly pressed 1920x1080, then the middle screen went black (I have surround setup), I heard a quick sound loop and then my computer shut down with no blue screen or anything.
My specs are:
i5-4690k (cooled by H100i)
16gb HyperX Fury RAM (4x4)
ROG Maximus VII Formula
Seagate Barracuda
2x ROG Poseidon 780 (not water cooled)
Three BenQ G2420HD (Left and right is running on first GPU, middle monitor ran on second GPU)
What I know:
My middle monitor does not receive a signal
The 2nd GPU is not working (doesn't turn on on boot up)
The 2nd GPU isn't shown under video adapters in device manager
Nvidia control panel does not show the 2nd card (it doesn't really show anything other than stereoscopic 3D settings)
There is no lit up logo on my 2nd GPU
Pulling out the power cable and waiting one minute does not work
My computer updated after it crashed (not sure if relevant)
If you know what happened or if you've experienced it yourself please let me know. If there's any questions I will try to answer them the best I can.
Thank you
- Lars
Me and some friend were playing DayZ. I had 30-40 FPS, so naturally I wanted to change that. I went to video settings and put everything to low, as well as render resolution and interface resolution. I didn't like to have interface resolution at 800x600, so I changed it back (1920x1080). I changed the render resolution but I mispressed the right resolution, so I quickly pressed 1920x1080, then the middle screen went black (I have surround setup), I heard a quick sound loop and then my computer shut down with no blue screen or anything.
My specs are:
i5-4690k (cooled by H100i)
16gb HyperX Fury RAM (4x4)
ROG Maximus VII Formula
Seagate Barracuda
2x ROG Poseidon 780 (not water cooled)
Three BenQ G2420HD (Left and right is running on first GPU, middle monitor ran on second GPU)
What I know:
My middle monitor does not receive a signal
The 2nd GPU is not working (doesn't turn on on boot up)
The 2nd GPU isn't shown under video adapters in device manager
Nvidia control panel does not show the 2nd card (it doesn't really show anything other than stereoscopic 3D settings)
There is no lit up logo on my 2nd GPU
Pulling out the power cable and waiting one minute does not work
My computer updated after it crashed (not sure if relevant)
If you know what happened or if you've experienced it yourself please let me know. If there's any questions I will try to answer them the best I can.
Thank you
- Lars
Facebook
Twitter
Instagram