Hi ,
couple of day ago I installed cooler master hyper D92 air cooler using only pea size thermal paste, I connect both cooler fans with provided splitter and connect to single cpu connector. but I am having the same temperature as i was having with the stock intel cooler.
Min = 35 degrees
Max = 45 degress (sometimes 47)
motherboard = asus maximus vi hero
cpu = intel core i5 4440
chassis - cooler master 690III. one 200mm fan in front and one 120mm fan at rear.
my room temp can be around 26-28 degrees these days
do i have to change any settings in BIOS. currently every setting in BIOS is default.
thanks
couple of day ago I installed cooler master hyper D92 air cooler using only pea size thermal paste, I connect both cooler fans with provided splitter and connect to single cpu connector. but I am having the same temperature as i was having with the stock intel cooler.
Min = 35 degrees
Max = 45 degress (sometimes 47)
motherboard = asus maximus vi hero
cpu = intel core i5 4440
chassis - cooler master 690III. one 200mm fan in front and one 120mm fan at rear.
my room temp can be around 26-28 degrees these days
do i have to change any settings in BIOS. currently every setting in BIOS is default.
thanks