Hi,
My setup:
CPU: AMD FX-8320
Cooler: Thermalright IFX-14
MB: 970A-D3P
GPU: GeForce GTX 660
Running standard in Cooler Master HAF-932 case. There is no problem with cooling, but I want to try water for the fun and looks of it. After some reading and research of local market I came up with a list and a couple of questions.
The list:
Pump Koolance PMP-450
Radiator XSPC RX360
Reservoir XSPC Photon 270
CPU Block XSPC RayStorm
Clamp Koolance CLM-13 Hose Clamp for OD 16mm
Tubing XSPC FLX Red UV 3/8" ID, 5/8" OD
Fittings XSPC G1/4" to 3/8" ID, 5/8" OD
Gasket XSPC 360mm Radiator Gasket
It is my understanding that I will need two fittings for radiator, two for CPU block, pump needs two clamps, and reservoir I am not sure, at least two for In and Out, do I need 3rd fitting for 3rd port?
Q1: Why reservoir has three ports if there is water in and out.
Q2: How does bleeding happen, what do I need consider in this regard before I get into this.
Q3: I most likely will add the GPU block to this at some point, will the radiator be enough?
Did I miss any components I need for this?
Thank you,
Andrei.
My setup:
CPU: AMD FX-8320
Cooler: Thermalright IFX-14
MB: 970A-D3P
GPU: GeForce GTX 660
Running standard in Cooler Master HAF-932 case. There is no problem with cooling, but I want to try water for the fun and looks of it. After some reading and research of local market I came up with a list and a couple of questions.
The list:
Pump Koolance PMP-450
Radiator XSPC RX360
Reservoir XSPC Photon 270
CPU Block XSPC RayStorm
Clamp Koolance CLM-13 Hose Clamp for OD 16mm
Tubing XSPC FLX Red UV 3/8" ID, 5/8" OD
Fittings XSPC G1/4" to 3/8" ID, 5/8" OD
Gasket XSPC 360mm Radiator Gasket
It is my understanding that I will need two fittings for radiator, two for CPU block, pump needs two clamps, and reservoir I am not sure, at least two for In and Out, do I need 3rd fitting for 3rd port?
Q1: Why reservoir has three ports if there is water in and out.
Q2: How does bleeding happen, what do I need consider in this regard before I get into this.
Q3: I most likely will add the GPU block to this at some point, will the radiator be enough?
Did I miss any components I need for this?
Thank you,
Andrei.
Facebook
Twitter
Instagram