I have at&t Motorola router as our devices connect to the Internet through wifi. Concerned about my kids' usage of the web, I was trying to configure my router. I went to the 'Home Network' and tried to filter devices using the Internet by mac address. I lost connection immediately. I found out then that the router's lids of 'wireless' and 'wifi setup' are off. We have no internet now. Any help?
My at&t Router's Wifi Lid Went off
- Thread starter new74life
- Start date
Solution
g90814
Honorable
- Apr 11, 2013
- 1,382
- 1
- 11,960
You'll need to do a factory reset... you basically locked yourself out of the router.
You *might* be able to connect with ethernet cable... check that first.
Otherwise, to do a factory reset, for most devices, just hold in the recessed reset button (usually in a small hole on back of router) for 10 seconds, then release. In a minute or two, you'll be able to connect to the router, but you'll have to do all settings from scratch.
You *might* be able to connect with ethernet cable... check that first.
Otherwise, to do a factory reset, for most devices, just hold in the recessed reset button (usually in a small hole on back of router) for 10 seconds, then release. In a minute or two, you'll be able to connect to the router, but you'll have to do all settings from scratch.
TRENDING THREADS
-
-
-
Question Intel Arc A750 for around $190. Is it worth it?
- Started by Dolphing Kujog
- Replies: 2
Facebook
Twitter
Instagram