Newbie trying to overclock AMD FX 8320 3.5 Ghz, Please Help XD

Muhammad Zulfikar

Reputable
Nov 25, 2014
44
0
4,530
I have power supply Corsair RM 550W and processor AMD FX 8320 3.5 GHz with cooler master hyper 103 and my motherboard is MSI 970A - G43. So how much GHz i get, if im using default voltage ?
 
Solution
That motherboard isn't idea for heavy overclocking, please do some reading and research before you start. I would suggest getting a case fan and pointing it at your Northbridge for sure. 4ghz is about as far as I would consider pushing that setup, 4.2ghz if you have some outstanding cooling going on the motherboard itself and I wouldn't recommend this for long periods.

These should be helpful

AMD_FX_Performance_Tuning_Guide.
http://sites.amd.com/us/Documents/AMD_FX_Performance_Tuning_Guide.pdf

For that board look here and you will find other threads as well in that forum.
http://www.overclockers.com/forums/showthread.php/733152-AMD-970A-g43-opinions

delaro

Judicious
Ambassador
That motherboard isn't idea for heavy overclocking, please do some reading and research before you start. I would suggest getting a case fan and pointing it at your Northbridge for sure. 4ghz is about as far as I would consider pushing that setup, 4.2ghz if you have some outstanding cooling going on the motherboard itself and I wouldn't recommend this for long periods.

These should be helpful

AMD_FX_Performance_Tuning_Guide.
http://sites.amd.com/us/Documents/AMD_FX_Performance_Tuning_Guide.pdf

For that board look here and you will find other threads as well in that forum.
http://www.overclockers.com/forums/showthread.php/733152-AMD-970A-g43-opinions

 
Solution

Muhammad Zulfikar

Reputable
Nov 25, 2014
44
0
4,530


So right now i have 2 Question :
How about if i overclocking until 4 ghz for long periods ? is it fine ?
And if im not overclock my processor would my motherboard life longer and still have good perfomance ?
 

delaro

Judicious
Ambassador
Up to 4ghz should be fine and no it shouldn't hurt the life of the board, it's a good quality motherboard it just doesn't use a good VRM power phase to be overclocking heavy. I would suggest the fan pointed at the North bridge though that will take the ????? and possible shutdowns out of the picture.