Pentium E5200 with a Foxconn G31MX - Need help with voltages to overclock !

Toggle sidebar Toggle sidebar
B

BuBu Shofronea

Distinguished
Sep 10, 2014
489
2
18,795
So i own this old cpu with the same old MoBo and atm it's OC'ed to 3.0 but i've seen lots of people going up to 3.5 or higher...
But most of them didn't even changed the voltages and if i do so, it won't work.
So i want some help with overclocking this cpu to a higher value than 3.0 and i need the values of voltages for each 10MHz i set to the Bus Speed ( which now is at 240 ) - so if i set it to 250, how much should i increase the voltage ?

Thx in advance.
 
Sort by date Sort by votes
B

BuBu Shofronea

Distinguished
Sep 10, 2014
489
2
18,795
Well i'm talking with those who have used an E5200... by the way i went back to BIOS and the max Bus Speed i could set to was 247 with the Core Voltage to "Default" but it's very unstable cuz i get my computer rebooting almost everytime when windows is loading and if i set to 248 or higher with the Core Voltage to "Default" i get in a boot loop and very hard getting to BIOS again after.
And currently i'm using the Bus Speed to 240 ( as i said ) and the Core Voltage to +0,2000V ( max i can set is +0,2500V )
Help
 
Upvote 0 Downvote
B

BuBu Shofronea

Distinguished
Sep 10, 2014
489
2
18,795


Well, yeah, but i only got the Bus Speed and the Voltages.. and as i said, if i set the Bus Speed higher than 247 without changing the voltages i get into a boot loop
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom