Hi
I recently built a new pc, march 6th
I went for the following
HyperX FURY Series 8GB (2x 4GB) DDR3 1866MHz CL10 DIMM Memory Module Kit - White
Crucial CT256MX100SSD1 256GB MX100 SATA 2.5 Inch 7mm SSD Includes 9.5mm Spacer
ASRock Mod 1150 Z97 Extreme4 ATX Motherboard
Intel Core i5 i5-4690K CPU (Quad Core 3.5GHz Processor, 6MB Cache, Intel HD 4600 Graphics, Socket H3 LGA-1150)
Corsair Builder Series CXM 600W Modular 80 PLUS Bronze Certified ATX/EPS PSU
all was working well but i wanted to upgrade my old radeon hd 7770 to the gtx 580.
so i uninstalled ati drivers turned pc off and unpluged power. i then installed the new gtx 580.
once installed the pc would not power up, no lights on the mother board at all.
i have taken it all apart and rebuilt, i have tested the psu works.
but still it wont show power to the motherboard.
i have read on a few threads that this has happened to other people however the solution is not always explained clearly?
any suggestions of how i can fix this problem?
not sure what the buttoms on the mob do, their is a switch one that goes from A to B? should i touch this
their is the power button and reset button, also next to the reset button their is a clrcb button?
NOTE the usb works on the case in which motherboard is pluged into ( i can charge my phone from )
Thanks
I recently built a new pc, march 6th
I went for the following
HyperX FURY Series 8GB (2x 4GB) DDR3 1866MHz CL10 DIMM Memory Module Kit - White
Crucial CT256MX100SSD1 256GB MX100 SATA 2.5 Inch 7mm SSD Includes 9.5mm Spacer
ASRock Mod 1150 Z97 Extreme4 ATX Motherboard
Intel Core i5 i5-4690K CPU (Quad Core 3.5GHz Processor, 6MB Cache, Intel HD 4600 Graphics, Socket H3 LGA-1150)
Corsair Builder Series CXM 600W Modular 80 PLUS Bronze Certified ATX/EPS PSU
all was working well but i wanted to upgrade my old radeon hd 7770 to the gtx 580.
so i uninstalled ati drivers turned pc off and unpluged power. i then installed the new gtx 580.
once installed the pc would not power up, no lights on the mother board at all.
i have taken it all apart and rebuilt, i have tested the psu works.
but still it wont show power to the motherboard.
i have read on a few threads that this has happened to other people however the solution is not always explained clearly?
any suggestions of how i can fix this problem?
not sure what the buttoms on the mob do, their is a switch one that goes from A to B? should i touch this
their is the power button and reset button, also next to the reset button their is a clrcb button?
NOTE the usb works on the case in which motherboard is pluged into ( i can charge my phone from )
Thanks