Can I plug 6-pin connector into 10-pin jack on my semi-modular PSU

chrisaston · Apr 4, 2015

Hello Everyone!

I am have a question concerning PSUs. I have a Antec HCG-520M in my PC. Because this PC is second hand, I don't have all the cables that came with it originally. My case uses molex connectors to power the lights and some of the fans, so I need to buy a replacement molex cable.
I found this online:

http://www.moddiy.com/products/Antec-ECO-Series-Modular-Power-Supply-PSU-Sleeved-IDE-Molex-4%252dPin-x-3-Integrated-Cable.html

The problem I have is that my PSU seems to only have 5 and 10 pin jacks. Here's a photo

http://www.xtremehardware.com/images/stories/Antec/HCG-520m/analisi_1/00045_ANTEC_HCG-520M_WWW.XTREMEHARDWARE.COM.jpg

Will I be able to plug the 6-pin connector on the replacement molex cable I found into one of these 10-pin jacks? I've been researching all day and haven't found any answers. Any help would be greatly appreciated.

Emerald · Apr 4, 2015

No because you don't know the PIN out of the 10-PIN connector.

Contact Antec and see if they can sent you replacement cables.