- Nov 26, 2014
- 37
- 0
- 4,540
Let me start out by telling you that this is my first custom PC build ever. I know quite a lot about the components in the computer, and I'm fairly sure they will all work well. (Build is located here: http://pcpartpicker.com/p/tpPCkL) However, since I've never built a PC before, I don't know exactly what to do for cooling. I don't think any of the components in my build are TOO hot, so I was going to go with two cheap high speed 120 mm Yate Loon's (http://www.amazon.com/Yate-120mm-Speed-D12SH-12-Black/dp/B0047EDSWW/ref=pd_cp_pc_1). The case also comes with a 120 exhaust fan. I was going to leave the exhaust fan be, and use the two Yate Loon's as intake fans. Would this be enough cooling for this build? If not, what could I do? This case only supports two 120 mm intake fans and one exhaust fan anyways, so I couldn't use a 140 mm fan. If you have any comments on the build and not just the cooling situation I would love to hear them also! Thanks! (P.S., I would be doing some long gaming sessions with this build on high settings, but no overclocking, due to the limited capabilities of the motherboard.)
Facebook
Twitter
Instagram