I need advice, thanks in advance ?

PC-Master

Reputable
Apr 7, 2015
2
0
4,510
Is it harmful if I this graphics card installed in my case, I ask because the graphics from the picture I have to move forward a bit to tighten the screw and clamping managed. I was afraid that something does not break, but mostly she lay down in the slot.
That's my graphics HD 6450 PowerColor Go Green Low Profile HTPC 1GB DDR3 64bit DX11 and case ATX midi tower. My Case :
1984

GPU my :
db5c9091417b6e6860621f4f2447b0ef.jpg
 
Solution
Don't know why the card would not fit, all cases and motherboard should be on the same standard. As long as you are not bending the card or it's trying to pull out of the slot when screwed down, you will be OK. If you have to bend the backplate a bit to reach the screws that is fine.
Don't know why the card would not fit, all cases and motherboard should be on the same standard. As long as you are not bending the card or it's trying to pull out of the slot when screwed down, you will be OK. If you have to bend the backplate a bit to reach the screws that is fine.
 
Solution