So I just built a PC, and, all is well. Except for on problem. Whenever I either shut down my PC or restart/reboot I turns on perfectly, except it wont load any display onto my monitor. I do believe that it recognizes my HDMI cable because it stops trying to search for Analog or Digital inputs. I have tried a VGA cable aswell, and it has the same problem. My friend also connected his laptop to my monitor with the same HDMI cable and it worked fine. The only way I can get it to work is if I switch my PSU off at the back then turn it on as usuall. Any help would be great.\
SPECS
Power Supply- Corsair VS550
Mobo- Asrock 980de3
Graphics Card- Sapphire Radeon R9 270x 2gb DDR5
Ram- Kigston HyperX fury 2x4gb 1866mhz
Case- Corsair Carbide Spec- 02
SSD- Kingston 120gb
HDD- Some 3 terabyte 7200rpm drive
No Disk Drive
SPECS
Power Supply- Corsair VS550
Mobo- Asrock 980de3
Graphics Card- Sapphire Radeon R9 270x 2gb DDR5
Ram- Kigston HyperX fury 2x4gb 1866mhz
Case- Corsair Carbide Spec- 02
SSD- Kingston 120gb
HDD- Some 3 terabyte 7200rpm drive
No Disk Drive
Facebook
Twitter
Instagram